Tech Tip

1.  Bad Speakers will cause your unit to shut off.  If it still turns off after speakers are disconnected, the receiver is bad. Always check the receiver with volume at minimum levels.

2.  Onkyo Factory rest procedure: Turn on receiver. wait 1 minute, THEN press and hold down the VCR selector button while pressing the power button, unit should reset then shut off. Then power back on again. You should try this before bringing in the receiver for service as this may fix any minor problems that you are having.

AV Electronics LLC
610 Station Drive
Carmel, IN  46032
(317) 853-6900

3.  Denon AVR3311 And AVR991. Internet Connection problems :  There has been a software error causing this problem. The software needs to be reinstalled by your Denon Service Center.
4.  When Lighting Storms Approach, To Prevent HDMI Failure. Please Unplug all HDMI Cables from The Receiver. Surge Protectors will not protect HDMI Failure during Lighting Storms.
.  Any Pioneer Elite Models purchased on-line are not eligible for warranty repair. See pioneer web site under where to buy !

OPEN
MONDAY - THURSDAY
10 AM - 5 PM
FRIDAY
10 AM - 4 PM
SAT. - SUN. CLOSED
PLEASE CALL FOR APPOINTMENTS AFTER 5 PM
 

aaaaaaaaaaaaiii